China MDF supply · UAE projects

Raw MDF Supplier for UAE & GCC

Factory-direct raw MDF from Nantong, China for importers, distributors, furniture makers and joinery projects. Review 12–25 mm listed thicknesses and E1 or E2 options, then discuss custom specifications and CIF or EXW terms on WhatsApp.

Discuss your requirements ↗Explore specifications

Factory-listed modelsCustom thickness & densityChina supply for UAE

MDF panel stacks inside the supplier’s warehouse

Factory warehouse04 / STOCK

Factory-listed range12–25 mmCustom thickness & density

Product range

Built around the way
your buyers work.

For cabinetry, furniture, joinery and interior fit-out projects. Start with a factory-listed model; we’ll confirm the matching production details with the factory.

Close-up of MDF board surfaces photographed at the factory

01 / Core board01

Raw MDF

Factory-listed MDF models for furniture, cabinetry and joinery. Tell us your face, surface and end-use requirements when you inquire.

Discuss this option ↗

Wrapped MDF sheets stacked in the factory

02 / Panel options02

Thickness & density

Listed thicknesses are 12, 15, 18, 20 and 25 mm. Custom thickness and density can be discussed; sheet dimensions are confirmed per order.

View model list ↗

Stacks of MDF boards stored at the factory

03 / Grade & documents03

Verify for your project

Share your emission-class and document needs. This site supplies raw MDF only; E1 and E2 options are confirmed against factory availability for each enquiry.

Check availability ↗

Factory-listed MDF models

Choose a starting
specification.

These model codes are transcribed from the factory list. Thickness and density are customizable. Sheet dimensions and order-specific documents are confirmed before quotation.

Thickness: 12 / 15 / 18 / 20 / 25 mmDensity codes: 630 / 650 / 660 / 680 / 690 / 700 / 720Custom thickness & density

Thickness	Factory-listed model codes	Factory notation
12 mm	M12mm690E1M12mm690≤15mg	E1 marking / ≤15mg marking
15 mm	M15mm650M15mm690E1M15mm720E1M15mm690≤15mg	No suffix = E2 per factory / E1 / ≤15mg marking
18 mm	M18mm660M18mm680M18mm700M18mm690E1M18mm720E1M18mm690≤15mg	No suffix = E2 per factory / E1 / ≤15mg marking
20 mm	M20mm700	No suffix = E2 per factory
25 mm	M25mm630M25mm680M25mm700	No suffix = E2 per factory

Reading the codes & checking the detailsM = MDF; the next number is thickness in mm; the following number is the factory density value/code. Per the supplier, E1 is ≤8 and models marked “≤15mg” are typically around 12–13. Units and test method were not supplied, so confirm density units, emission test method, sheet size and batch-specific reports before comparing with a project requirement. Codes without a suffix are E2 per the supplier. E0 is not currently offered. Sheet dimensions, density units, test methods, batch reports and packaging are confirmed before quotation.

Raw MDF applications

Built for furniture, cabinetry and joinery.

Choose a starting thickness and grade, then confirm board size, face requirements, quantity and destination port with our team.

Furniture manufacturing

Raw MDF for internal components and furniture production. Confirm the required thickness, density, machining needs and quality documents before ordering.

Ask about furniture MDF ↗

Kitchen cabinets and cabinetry

Discuss raw MDF specifications for cabinet components and project requirements. We confirm the matching product details and factory documentation per order.

Discuss cabinet specifications ↗

Shop fitting and interior joinery

For shop-fitting and joinery buyers, share the board size, end use and finishing process so the relevant raw MDF specification can be confirmed.

Request a project quotation ↗

A straightforward process

From requirement
to quotation.

A clear sourcing path for UAE importers, distributors, furniture makers, joinery shops and project buyers.

01 / TELL US

Share your requirements

Send a model code or board type, thickness, density, sheet size, quantity, end use and destination port, such as Jebel Ali.

02 / CONFIRM

Check factory details

We verify the matching production option, documents and supply details with the factory.

03 / QUOTE

Review the offer

Receive a quotation based on confirmed product details and the shipment terms discussed.

Factory evidence

Verify the factory behind the quotation.

ordernPlus supplies raw MDF from its own factory in Nantong, Jiangsu, China. The company operates as Nantong Arder Plus International Trade Co., Ltd. and brings 16 years of MDF industry experience to order discussions.

Raw MDF panel stacks inside the factory storage area in Nantong — Factory storage area, Nantong

Close-up of raw MDF board surfaces — Raw MDF board surface

Wrapped raw MDF sheets prepared inside the factory — Wrapped sheet stacks

Raw MDF board stacks stored at the Nantong factory — MDF board stacks, Nantong

Own factoryNantong, Jiangsu, China

Experience16 years in the MDF industry

Legal entityNantong Arder Plus International Trade Co., Ltd.

DocumentationOrder-specific reports and documents confirmed before quotation

The factory photographs above show the Nantong storage area, raw MDF surfaces and wrapped sheet stacks. Approved public copies of corporate registration and E1 test documents are handled through the enquiry process; no stock, capacity or certification is claimed beyond the documents confirmed for an order.

Why ordernPlus

A direct, document-led sourcing process.

Own factory supply

Raw MDF supplied from our factory in Nantong, China.

16 years of experience

Practical MDF knowledge applied to each buyer requirement.

Details confirmed before quotation

Specifications, documents and supply terms are checked with the factory.

Flexible specification discussion

Thickness, density, sheet size and packaging can be discussed for the order.

CIF or EXW

Both trade-term routes can be discussed with your destination and quantity.

English WhatsApp support

The responsible manager replies to English enquiries and order questions.

For an accurate quotation

Send these details on WhatsApp.

Model code or thickness
Density and emission grade
Sheet dimensions
Quantity and estimated monthly demand
End use or surface requirements
Destination port, such as Jebel Ali
CIF or EXW
Test report, packaging or other document requirements

MOQ, lead time and price depend on the confirmed specification and quantity; no fixed figures are stated on this page.

Request a raw MDF quotation on WhatsApp ↗

Frequently asked questions

Raw MDF sourcing for UAE and GCC buyers.

What raw MDF thicknesses do you supply?

The listed range is 12, 15, 18, 20 and 25 mm. Custom thickness requirements can be discussed and confirmed against factory availability for the order.

Can you supply 18 mm E1 MDF to the UAE?

18 mm E1 models appear on the current factory list. Availability, sheet dimensions, documents and test reports are confirmed for each UAE enquiry before quotation.

What is the difference between E1, E2 and ≤15mg MDF?

E1, E2 and ≤15mg are different factory emission notations. The source list does not state the density unit or formaldehyde test method, so these details and the relevant report are confirmed before an order.

Can density, sheet size and thickness be customized?

Thickness, density, sheet size and packaging can be discussed with your requirement. Final options are confirmed against the factory before quotation.

Can ordernPlus quote CIF Jebel Ali?

Yes. Share the quantity, specification and destination so the CIF and EXW options can be compared. Freight and final terms are confirmed for the enquiry.

What information should I send for an MDF quotation?

Send the model or thickness, density and grade, sheet size, quantity, end use, destination port and whether you require CIF or EXW.

How can I verify the factory and the E1 test report?

The factory is in Nantong, Jiangsu, China. Contact us for the approved public registration, factory-authorisation and E1 report documents relevant to the order specification.

Do you supply buyers outside Dubai and the UAE?

The site is prepared for buyers across the UAE and wider GCC. We discuss enquiries from importers, distributors, furniture makers and joinery businesses in those markets.

Do you offer E0 or other board types?

E0 is not currently offered. This website is dedicated to raw MDF only; no other panel product is presented here.

What about MOQ, lead time and price?

These depend on the confirmed specification, quantity and shipment. No fixed MOQ, lead time or price is stated on this page; they are confirmed in the quotation.

Let’s talk panels

What are you
looking to source?

For an accurate UAE quote, send the model code or target specification, sheet size, quantity, end use and destination port. We’ll verify the factory details and reply with next steps.

Panel specificationModel code, thickness, density, sheet size and grade

Order quantityTarget volume or estimated monthly demand

Destination & useUAE port, end use, report or surface needs

WhatsApp：+86 151 9589 8297 ↗Email：Ericqiu0110@gmail.com ↗

WhatsApp ↗